Report item
Item specifics
  • Model Number: BK-0011
  • Item Type: Jewelry Tools & Equipments
  • Item Type: Jewelry Tools & Equipments
  • Jewelry Tools & Equipments Type: Rotary Tools & Accessories
  • Product Features: Jewelry Polishing Machine
  • Voltage: 220V
  • Frequency: 50/60hz
  • Speed: 1800-7000 rpm
  • POwer: 1/6HP
  • net weight: 3KG
Product Description

jewelry Tools Polishing Machine BL-2 Bench Lathe , Jewelry Tools and Euipment with 2pcs FREE budffing wheels & 78mm brushes

Jewelry Tools Polishing Machine

BL-2 bench lathe

jewelry tools and equipment

Grinding machine

Polishing motor




Width:13"(330mm)between spindles,

Packing Size:26.5*15*15.5cm

1/6HP high Torque Motor 125 Watts (continuous,rating) 5/16" Dia.Dotor.Shaft Ball Bearing 0-10000RPM.

Guideline for Buffing and Polishing

Type of Material
Iron, Steel
Hard Metals
Soft Metals
Gold ,Siver
Plated ,Solid
Brass Plate
Copper Plate
Cut color
Cut color
Cut color
Cut color
Cut color
FOREDOM Compound
Emery White
(#4001) Rouge
Tripoli White
(#4002) Rouge
Do Red
Not Rouge
Cut (#4004)
Do Tripol
Not (#4002)
Tripoli White (#4002) Rouge
To figure Surface Feet Per Minute:
1/4diameter (in inches )of wheel x spindle speed in RPM = SFPM
Generally,speed of 1750 to 2450 is recommened for polishing.
Buffing requires a higher speed of approximately 3450 to 7000 SFPM

Bench Lathe Attachments: Tapered Spindles. Wheel Mandrels .Cha-1Collet Holder ,CHA-4 Collet Holder , BO-14N Flexade
O peration
B ecause of the higher maximum speed (approximately 7,000RPM to 7,500 RPM) and variable speed control,the Foredom Bench Lathe has several advantage over concentional single or two polishing and buffing lathes:
1.The same size buffing wheel can be used to obtain different suface , as measured in surface feet per mimute (SFPM). A3 or 4 diameter buff can provide the 1,750 to 3,450 SFPM recommended for buffing ,The chart below shows the SFPM obtained with different diameter wheels at full ,medium ,and low speeds,
2.The SFPM can be varied while will using the same wheel ,This willl give better results on different types of material.
3.The 7,000 RPM maximum speed will enable you to get much higher SFPM with smaller buffs such as 1 to 2buffs or inside ring buffs than slower single or double speed equipment
4.The maximum speed of 7,000 RPM is also fast enough to permit the use of small mouted abrasive points ,brushes ,cutters or other accessories ,in the two collet holders CHA-1 and CHA-4,and B Flexades which are avilable as optional accessories .
For additional information on buffing and pollishing procedure ,wheel selectinon ,and Foredom buffing and polishing compounds,please refer to Form No.1234
Full 7.000RPM 1.750
Med 4.000RPM 1,000
Full 7.000RPM 3,500
Med 4.000RPM 2,000
Full 7.000RPM 5,250
Med 4.000RPM 3,000
Full 7.000RPM 7,000
Med 4.000RPM 4,000
Packaging Details
  • Unit Type: piece
  • Package Weight: 4.0kg (8.82lb.)
  • Package Size: 28cm x 35cm x 15cm (11.02in x 13.78in x 5.91in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 4.0kg (8.82lb.)
  • Package Size: 28cm x 35cm x 15cm (11.02in x 13.78in x 5.91in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.